Everest Trade Paints - All Acrylic Ultimate Metal Primer

KEY FEATURES AND BENEFITS

• Quick-drying formula
• Greatly reduces flash rusting
• Industrial quality
• Anti-corrosive properties
• High durability and easy cleanup
• Easy application
• Can be used on almost any metal surface inside and out
• Low odour formula

Perfect for use with Everest Trade Paints Ultimate Barn Paint and all acrylic topcoats

PRODUCT DESCRIPTION
Everest Trade Paints - Water Based Ultimate Metal Primer is a water-based primer that can be used on ferrous and non-ferrous metals, inside and out.

This product is a water based acrylic primer paint with anti-corrosive properties to prevent rust formation, this product should be applied to bare metal before applying any other acrylic based Everest Trade Paints topcoats.

Ideal for all types of metal implements, tools, structures in and around gardens, farms, houses and factories. Ultimate Metal Primer is quick drying, easy to apply and is easily cleaned up.

SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust, dirt, grease, wax and flaking paint. Ensure surface is completely dry and free from condensation and damp. Smooth glossy surfaces should be lightly abraded to provide a key.
Remove any loose or flaking paint.

Non-ferrous surfaces: Lightly abrade to a bright surface. No need to etch or pre prime galvanised steel. Allow new galvanised steel to be weathered for two months before painting with Everest Trade Paints Metal Primer.

Ferrous surfaces: On mild steel remove as much rust as possible (preferably cleaning to Swedish standard SA2½) apply a first coat of Everest Trade Paints Metal Primer as shop primer, within two hours of cleaning
 
 
COLOURS AVAILABLE
Mid Grey
Red Oxide

This product can also be mixed to any BS 4800 and RAL colours.

 
SPREADING RATE (Coverage)
Approximately 8 - 12 square metres per litre per coat when applied by brush or roller depending on the texture and porosity of the substrate.

Spraying will considerably reduce the coverage rate depending on the type of spray equipment used. Airless spray systems for example coverage will be reduced to approximately 6-8sq meters/litre per coat. When using a tip size of 13-15 thou @ 50-70°angle and a pump pressure of 2500 P.S.I.
 
DRYING TIME
Touch Dry:      2-4 hours at 18°C

Overcoatable: 4 hours at 18°C

Fully hardened after one month. Ensure good ventilation during application and drying.

APPLICATION
Brush, Roller, or Spray.

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.

On ferrous surfaces some flash rusting may occur, especially if below the dew point. This is expected and will not affect the anti-corrosive properties of the product. In most cases only one coat is required but occasionally a second coat may be required to ensure maximum durability and build.

STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
 
CLEANER / THINNERS
Clean up with warm soapy water.

Remove as much product as possible prior to cleaning.
 
BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.

PRODUCT TECHNICAL SPECIFICATIONS

Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.

DATA SHEETS AND PRODUCT FILES

Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.

Files and Data Sheets

MSDS - Material Safety Data Sheet

Coverage Calculator

This is our coverage calculator. Enter the size (m²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.